Home      Ask a Question      My Stuff      Help   
  
FlexClock - Programming the Bell System on the Z18
Setting up and accessing the bell schedule menu can be done by pressing the MENU key twice (CAPS key twice on the GT400), and then enter the password 74642355 (spells "RINGBELL" on a phone keypad).

From the bell schedule menu, you can set scheduled times of when the bell is to ring by:

- Day of the week (e.g. Monday thru Friday)

- Specific date (e.g. December 25)

- A combination of both.

Bell schedule changes take effect immediately. They are not transmitted from clock to clock, so they affect only the clock being programmed. This also means Bell settings from one clock cannot be transmitted to another clock.

If the power is turned off when a scheduled bell event occurs, the bell will not ring. There will be no "make-up" ring even if the power comes back on later, unless the power comes on within 60 seconds of the time it is supposed to ring.

Image from the actual manual found here:




ID
768
Category
<Unassigned>
Date Created
10/31/2012 9:53:04 AM
Date Updated
7/9/2015 11:32:59 AM
Back to Search Results