 |
| ||||||
| FlexClock - Disable/Enable PIN and Finger Print Authentication | ||||||
| ||||||
| All of our FlexClocks (Z23/33, Z24/34 and Verifone FlexClocks with an attached PrintReader) will default to the "SEMI" mode requiring a PIN AND fingerprint verification when shipped. (Only if the PIN number has been enrolled with a fingerprint.) This is to provide our customers with the following: 1. Greater security 2. With two types of authentications this virtually eliminates the chances of a bad enrolled fingerprint being mistaken for another employee and having the punch assigned to the wrong time card. To enable or disable the old (print only) "Auto" method do the following: 1. Press 3 to access the clocks Managers Menu 2. Enter in the managers password (the default is 1234) then OK 3. Press 8. This opens up a hidden menu where you can turn this feature off/on 4. Select "1 Auto Mode Enabled" to have it accept prints only or "0 Auto Mode Disabled" to require a PIN and print 5. Press OK to accept the change then ESC to exit out of the menu. All FlexClocks (excluding the Z11, and Z18 because they lack a built in reader and any TImeClocks (330/380)) should have this feature BUT only the newer ones shipped by us after April 22nd will have them enabled (PIN and Fingerprint verification) by default. Any clocks already purchased before that date have the feature available, but you will need to access this menu to turn this on if they wish to use this feature. | |
| ||||
| Back to Search Results | ||||||